01 z 08
Rychlá a strašidelná DIY: Udělat běžec na stole
Netrvá tolik času, talentu ani peněz na to, abyste se stali běžným stolkem pro vaši kuchyň nebo jídelní stůl. Celkové náklady na naše dodávky byly nižší než 6 USD a celkový čas od začátku do konce byl méně než 30 minut. Žádné šicí dovednosti nutné!
Potřebné materiály
- 1/2-yard textilie, délka 45 "nebo 54"
- 5/8-palcový tavitelný spojovací materiál
- Měřící páska nebo dlouhé pravítko
- Nůžky
- Žehlička
02 z 08
Krok 1: Sběr materiálů
Tipy pro výběr látky
Tkanina obvykle běží ve standardní délce 45 nebo 54 palců, která dokonale funguje na standardním rozměru 48 nebo 60 palců. Změřte svůj stůl a zjistěte, co vám bude nejlépe vyhovovat. Pokud máte pochybnosti, jděte déle. Délku můžete kdykoli upravit tak, aby odpovídala.
Z poloviny yardu tkaniny byste měli mít perfektní šířku, abyste vytvořili 15 až 16 palcový široký stůl. Nevyžaduje žádné ořezávání!
Silnější textilie, jako je tkanina pro domácí výzdobu, bude lépe držet na mytí, ale jakákoli tkanina, která bude odolávat nejvyššímu nastavení žehličky, bude fungovat. Vzhledem k tomu, že jsme plánovali malovat naši stůl, zvolili jsme si tlustou bílou kachničku, známou také jako plachtovina nebo plátno.
03 ze dne 08
Krok 2: Vytvořte svůj první hem
- Ujistěte se, že tkanina je přibližná velikost hotového stolního běžeče, ale budete potřebovat dostatek extra na to, abyste vytvořili lem. (Krok 1 pro výběr tkaniny.)
- Železo po celé délce vaší tkaniny upravte hladkou povrchovou úpravu.
- Lehněte látku lícem dolů na žehlicí prkno. Počínaje nejdéle dlouhou délkou, sklopte přes jeden okraj tkaniny, abyste vytvořili lem, žehličku při jízdě.
- Zaměřte se na složený lem šířky 1 palce nebo méně, ale ujistěte se, že si nechte dostatek záhybu pro úplné zakrytí tavitelného spojovacího pásu. Můžete měřit, pokud chcete, ale tato strana nemusí být dokonalá. Pokud se dostanete mimo dráhu, neměňte paniku. Stačí žehličky tkaniny ploché a začít znovu.
- Po dokončení by se jeden okraj celé délky tkaniny měl sklopit s plochým žebrovaným lemem.
04 ze dne 08
Krok 3: Nastavte šířku
- Stále pracujete na dlouhém okraji tkaniny, nyní budete měřit od vaší žehlicí strany až po neupravenou stranu, abyste nastavili šířku svého běžce. Snažte se, aby váš běžec měl šířku 15 až 16 palců.
- Sklopte druhou hranu tkaniny a žehličky na zvolenou šířku. Nyní je, když budete chtít měřit, takže váš běžec bude mít konzistentní šířku. Jednoduše posuňme měřicí pásku po délce naší tkaniny, když skláníme a žehlijeme. Pokud vás to dělá nervózní, můžete měřit a zapínat lem, než budete žehlit.
- Jakmile skončíte, oba dlouhé strany vaší tkaniny by měly mít lem, který je žehlen plochý a krátké okraje se ještě rozvinou.
Nápověda k dekoru
Pamatujte si, že šití není raketová věda - zvláště při vytváření domácího dekorace. Můžete být zlomek palec pryč, a nikdo nikdy nebude vědět. Jen se bavte! Pokud se během žehlení objeví něco, měřte, jestli zůstanete na trati. Je-li váš běžec příliš křivý - zjistíte to více na tištěných tkaninách než na pevném materiálu - jen železné ploché a začít znovu. Velmi jednoduché!
05 z 08
Krok 4: Připojte své stávající hem
- Odřízněte délku tavitelného spojovacího pásu asi o jeden centimetr menší než je délka stolu. Umístěte tkaninu do tkaninového záhybu mezi lemem a stůl.
- Žehličku předehřejte na nejvyšší, nebo vlnu. Nastavte žehličku na páru. (Pokud nemáte parní žehličku, můžete lahvičku rozprašovat, abyste jemně vyčistili oblast, která se má žehlit, nebo použijte tenký, vlhký lisovací tkaninu.)
- S horkou žehličkou stiskněte každou délku lemu a spojte jej po dobu přibližně 10 vteřin, po celou délku běhu.
- Nechte vychladnout a zkontrolujte, zda je vaše pojistka v bezpečí. V případě potřeby stiskněte znovu.
- Opakujte všechny výše uvedené na druhé straně (nebo délce) svého běžce.
- Po žehlení, pokud je váš lem (nebo záhyb tkaniny) větší než jeden palec, můžete pečlivě ořezávat jakékoli další tkaniny.
- Nyní by měla být veškerá délka vašeho běžce spojena a dokončena. Způsob, jak jít!
06 z 08
Krok 5: Žehlete své konečné okraje
Jakmile jste si udělali čas, abyste dosáhli rovnou šířku a roztavili se po každé délce, dokončení konců svého běžce by nemělo trvat dlouho.
- Rozhodněte se o délce vašeho běžce. To je prostě osobní preference. Někteří jako krátký běžec a někteří jako běžec protékají po celé délce stolu. Bez ohledu na délku, kterou vyberete, je v pořádku a délka může být později zkrácena.
- Ořízněte délku svého běžce, je-li to nutné.
- Stejně jako jste udělali na každé straně vašeho běžce, sklopte přes okraj běžce přibližně jeden palec a vytvořte lem. Železo a opakujte na druhém konci. Upozornění: Ještě nezapojujte!
07 z 08
Krok 6: Dokončete a spárujte konečné okraje
- Jako byste obalili obal, zastrčte každý špičku lemu a železo.
- Stejně jako jste udělali na každé straně stolního běžecku, zkraťte délku lepicí sítě trochu kratší než okraj stolu. Umístěte lepicí tkaninu do záhybu a žehličky, dokud nebude lepená.
- A to je - váš stolní běžec je dokončen. Nyní se postavte zpět a vychutnejte si práci!
08 z 08
Krok 7: Ozdobte, zda je požadováno
Je to rychlé, snadné a cenově dostupné šablony nebo malování běžce. Nebo použijte propojovací web k upevnění ohraničeného okraje nebo jiných položek. S trochou kreativity je obloha limit!